Fiberlock IAQ 7000 Mold Resistant Coating
IAQ 6000 is a white, tintable mold resistant coating that contains a fungicide agent to resist mold growth on the dry coating surface. IAQ 6000 is a durable, flexible, and permeable 100% acrylic water based coating. IAQ 6000 has been tested by independent and certifiedlaboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. IAQ 6000 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6000 can also be used on new structural materials during building construction.
TINTINGIAQ 6000 may be tinted to any off-whiteor pastel based color. Add up to 2 oz. ofuniversal colorant per gallon. Start with50% of the tinting formula and adjust asnecessary.
APPLICATIONIAQ 6000 is supplied ready to use, but canbe thinned sparingly with water (up to 1/2pint water per gallon) for proper applicationconsistency if necessary. Apply IAQ 6000generously and uniformly by brush, roller,or airless spray. Apply one coat of IAQ 6000and ensure that the finished surface isproperly sealed. To ensure that the finishedsurface is properly sealed, two-coats maybe required on some porous surfaces.
COVERAGESmooth Surfaces- 250-400 sq. ft. per gallon
Porous Surfaces- 150-300 sq. ft. per gallon
DRYING TIME @ 70°F 50% R.HTo Touch - 1 Hour
Recoat - 4 Hours
CLEANUPClean tools and drippings with warmsoapy water before Fiberlock IAQ 6000dries. Dispose of all waste according to allexisting local, state and federal regulations.
