FLOORSHINE Polymer Floor Finish Coating - Color Chips 1 Gallon

  • Model: f309

The Original Color Chips Floorshine is the ultimate floor finish. A 25% solids, metal crosslinked, polymer finish will make your floors look wet even when they are dry. Some of the benefits of using Floorshine are:


superior protection durability
reparability
black mark & detergent resistant<..
Price :
$19.97

The Original Color Chips Floorshine is the ultimate floor finish. A 25% solids, metal crosslinked, polymer finish will make your floors look wet even when they are dry. Some of the benefits of using Floorshine are:


superior protection durability
reparability
black mark & detergent resistant
ultra high gloss
water resistant
non buffable 
non scuffing
self-leveling  use with or without sealer slip resistant (exceeds ASTM standard D2047-82)
most suited to high traffic areas
performs exceptionally well with either spray buffing or high speed buffing
V.O.C. Compliant

Where to use:

epoxy floor finishes
vinyl & vinyl asbestos asphalt tile   
concrete  
linoleum
urethane floor finishes
sealed terrazzo  
rubber  
composition tile   
wood

Directions for use:

Apply a thin uniform coat of finish to floor with new rayon mop. Allow to dry approximately 30 minutes. We recommend applying 3-4 uniform coats in this manner. Never pour left over finish back into the container to avoid contamination.

Coverage:
1000 - 1200 ft 1st Coat
1500 - 2000 ft 2nd Coat

 



Customers also purchased