Armorcote 309 Floorshine is the ultimate floor finish. A 25% solids, metal crosslinked, polymer finish will make your floors look wet even when they are dry. Some of the benefits of using Floorshine are:
superior protection durability
reparability
black mark & detergent resistant
ultra high gloss
water resistant
non buffable
non scuffing
self-leveling use with or without sealer slip resistant (exceeds ASTM standard D2047-82)
most suited to high traffic areas
performs exceptionally well with either spray buffing or high speed buffing
V.O.C. Compliant
Where to use:
epoxy floor finishes
vinyl & vinyl asbestos asphalt tile
concrete
linoleum
urethane floor finishes
sealed terrazzo
rubber
composition tile
wood
Directions for use:
Apply a thin uniform coat of finish to floor with new rayon mop. Allow to dry approximately 30 minutes. We recommend applying 3-4 uniform coats in this manner. Never pour left over finish back into the container to avoid contamination.
Coverage:
1000 - 1200 ft 1st Coat
1500 - 2000 ft 2nd Coat