Call: 1-800-227-8479
Contractor-Grade Epoxy Floor Coatings and Decorative Floor Flakes



m menu image  m home m cart

Complete Epoxy Floor Coating Kit/3 Car-900 Sq/Ft "Solventborne"

Starting at: $730.53

Please Choose:

Primer Coat - 2 Gallons






Color Chips - 8 Bags














Clear Topcoat - (2) 1.5 Gal Kits






Disposable OV Mask




Add to Cart:



Details

  • Model: Solventborne 4 car Kit
  • Manufactured by: Original Color Chips Company

Description

SYSTEM 4
Original Color Chips Solventborne Floor Coating Kit
(for garages/warehouses only)

The system we recommend for putting down a great, high build, durable and chemical/uv-resistant epoxy floor, would be as follows:
 


System #4 (Solvenborne Kit)
900+ sq/ft kit

2 -1-gal kits Pre-Prime 167 Coat Epoxy (500 sq/ft x 2) 66.36 = 132.72
2- -2-gal kits of Devran 224HS Basecoat Epoxy (450+ sq/ft x 2) 132.16 = 264.32
8-lbs Color Chips 9.48 x 8 (medium coverage) 75.89
2 -1.5 gal kits of HPU 747 VOC (500 sq/ft x 2) 128.80 = 257.60

*Kit price 730.53*


Note: The etch n’ clean is not included in this kit. Though it can be used, most users of this kit grind the concrete with a concrete floor grinder or use Muriatic Acid. (link to muriatic acid instructions here)

 
HOW TO ORDER:

You can now build and choose your own custom color chip blend. You can chose up to four colors.
(if you want only 3 colors, leave the default field "none" for the fourth color.)

To help you select your own custom color combinations, please use our Color Chip Blending Tool so you can get an idea of what the colors will look like together. (computer screens all vary in color so it will give you a basic representation of the color).

Basically it works like this: You first choose the size, then what colors you want using the dropdown menu. You pay per 1 lb. no mater what colors you choose it is always the same price.

Note: Only the Silver or Gold Metallics are available in the custom blend option. Also, The Neon Colored Chips are not offered in the microchip size.

 
BASECOAT OPTIONS & AVAILABLE CHIP COLORS

CHIP COLORS:Color Chip Chart
Click Here To View All Chip Colors

Quick Application Steps:

Etch the concrete with an acid wash or floor grinder
(to open up the pores of the concrete). After you successfully sweep away/vacuum up the debris, apply the preprime 167 sealer in a thin coat to soak deep into the substrate (this will seal the floor to assist in adhesion), wait until you are able to walk on it again to apply your 224HS basecoat epoxy (thin with a little bit of xylene to make it easier to apply), sprinkle your chips on top of the wet epoxy. Then wait overnight to apply your urethane clearcoat.

In the end, you’ll have a coat that seals off the floor and gets a good bite to the concrete, a coat that offers a high build color coat, and a chemical resistant / uv resistant layer as your finish coat.


System #4 Application Instructions

Product Data Sheets for the system we install for color chip broadcast systems:

Preprime 167 Penetrating Sealer
Devran 224HS High Build Epoxy Basecoat
Color Chips Decorative Flakes
 HPU 747 VOC - High Performance Urethane Clearcoat

Color Design Tool:
 www.colorchipselector.com 


Planning On Shipping Overnight, 2nd Day, or 3-Day select?
This solventborne kit cannot be expedited (shipped Next Day Air, 2nd Day Air, or 3-day Select) because it is considered a hazardous material and is no longer allowed on airplanes. 

 



Customers who bought this product also purchased...






Copyright © 2017 Norkan Inc / Epoxy Superstore Contractor Center. Powered by Zen Cart.